Question about Juan's Car Editor!
Question about Juan's Car Editor!
I want to make some modells but I can't find the way to make them not sink into the ground or just float above the ground. I remember there was a very detailed car physics description(maybe from Gentleman) but I can't find it now. Modell's y coordinates don't go below 0, shadows are the same. Maybe there's someting wrong with the size X, size Y and size Z? I don't know. Can someone help?
Always sign your every work in GR! Or use .txt files to inform us about ownership!
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
Re: Question about Juan's Car Editor!
I'd always suggest you to give your cars same negative values as positive (e.g. a 1,4m high car goes from -0,7 to 0,7 in y).
Because in the non-model window (where you also set the physics) you can type in only one "crashing" value.
but if any of the values is 0, the car will sink into the ground.
That's my knowledge.
Because in the non-model window (where you also set the physics) you can type in only one "crashing" value.
but if any of the values is 0, the car will sink into the ground.
That's my knowledge.
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
- Trigger Happy
- Posts: 7134
- Joined: Sat Dec 26, 2009 9:54 pm
- Location: CZE
- Contact:
Re: Question about Juan's Car Editor!
ask for a help by topic in subforum deserved for uploads of stuff? Moved.
My GR Racing Stats; thanks to GWR!
Re: Question about Juan's Car Editor!
I'm not an expert about this bit but i THINK the sizes of variables X,Y and Z are the 'lengths' of the car. X being width, Y being height and Z being length.
What i tend to do is make model so that it is in the 'middle'. this means that the width (X value) of one end is -0.9 and the opposite of that is 0.9; the length(Z value) is also symmetrical, -2 one end and 2 the other AND the height (Y value) symmetrical, -0.7 one end and 0.7 the other (i include the wheels). So for this model the sizes i would punch in would be: X = 0.9, Y = 0.7 and Z = 2. dunno if this helps
What i tend to do is make model so that it is in the 'middle'. this means that the width (X value) of one end is -0.9 and the opposite of that is 0.9; the length(Z value) is also symmetrical, -2 one end and 2 the other AND the height (Y value) symmetrical, -0.7 one end and 0.7 the other (i include the wheels). So for this model the sizes i would punch in would be: X = 0.9, Y = 0.7 and Z = 2. dunno if this helps
Re: Question about Juan's Car Editor!
Thanks guys! I'll try it later! I have to go now! Thanks again!
Always sign your every work in GR! Or use .txt files to inform us about ownership!
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
Re: Question about Juan's Car Editor!
I meant it the same way like JWong explained it
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Re: Question about Juan's Car Editor!
Awesome! It's okay now! Thanks guys!
Always sign your every work in GR! Or use .txt files to inform us about ownership!
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
*My tracks* Contact me on garbregr1.2@gmail.com
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
Re: Question about Juan's Car Editor!
As it should be, as JWong was bang on the money.
Re: Question about Juan's Car Editor!
Glad I could be of service
Re: Question about Juan's Car Editor!
Did you got it working on win7? Cuz i really want it working! It keeps saying that it cant acces register or something like that...Garbre wrote:I want to make some modells but I can't find the way to make them not sink into the ground or just float above the ground. I remember there was a very detailed car physics description(maybe from Gentleman) but I can't find it now. Modell's y coordinates don't go below 0, shadows are the same. Maybe there's someting wrong with the size X, size Y and size Z? I don't know. Can someone help?
Re: Question about Juan's Car Editor!
Be more specific please Wouter.
Re: Question about Juan's Car Editor!
Maybe you just need Required files (download)
I couldn't even show the "model" window at my XP SP3 before putting them in my windows folder
I couldn't even show the "model" window at my XP SP3 before putting them in my windows folder
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks