Page 2 of 4

Re: I have the .dll files, but the game still won't run.

Posted: Tue Apr 19, 2011 11:25 pm
by Larcen Tyler
Sorry, I meant to say the package, not the DLLs. But yeah, I'll do that right away.

Re: I have the .dll files, but the game still won't run.

Posted: Wed Apr 20, 2011 11:41 am
by Lerhond
You shouldn't upload any DLLs to your System32 folder or to your folder with GR. You should install runtimes, link are in readme.txt in GR package.

Re: I have the .dll files, but the game still won't run.

Posted: Sun May 22, 2011 5:25 pm
by Woppoz
Sorry for bringing this back up, but I downloaded VS 2010 thing and also that SDL thingy, still I'm getting some error about the MSVCR100.dll when I start GR :(
TE working fine, but meh, no use if you can't play ;(

I don't know where exactly or what exactly I have to do with that SDL thing after downloading so I put it in the GR folder and did nothing with it, just unpacked it ;)

Re: I have the .dll files, but the game still won't run.

Posted: Sun May 22, 2011 5:36 pm
by Paw
Do you have 64 bit system? If so, try not only the 64 bit version of VS, but also 32.

Re: I have the .dll files, but the game still won't run.

Posted: Sun May 22, 2011 6:08 pm
by Woppoz
Can't be it, 32 bit system over here.

It says something like:
Can't find entrypoint of procedure_invalid_parameter_noinfo_noreturn in DLL-file MSVCR100.dll

(Hope I translated it correctly now :P)

Re: I have the .dll files, but the game still won't run.

Posted: Sun May 22, 2011 7:19 pm
by Paw
You shouldn't put any .dll into GR folder, as written here. Just clean installation and the VS installed.

Re: I have the .dll files, but the game still won't run.

Posted: Sun May 22, 2011 7:26 pm
by Woppoz
Oh fail forgot to delete them

Thanks a lot Paw :bg:

Can't install V1.10...

Posted: Sun May 29, 2011 2:49 am
by Exkakx
I have the old version, it is version 1.

I tried to install the new one today, but when I started up the game, it said:

"This application has failed to start because MSVCP100.dll was not found. Re-Installing the application may fix the problem"

Help me! I really want the new version... :sorry:

Re: Can't install V1.10...

Posted: Sun May 29, 2011 3:02 am
by Trigger Happy
Read the readme, there it's solution. ;)

S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 8:49 am
by Lotus_Renault_GP
What I must do if game wrotes "Point of enter in procedure _invalid_parameter_noinfo_noreturn not searched in DLL MSVCR100.dll"? I am setup all needed files, reads readme, sets SDL,takefresh version, but...
IT DOESNT WORKS!!!!!!!!! :weep: :weep: :weep:
SOOOOOOOS!!!

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 10:20 am
by TuomoH
How did you set up the needed files? How many times did you do it? Which version of the files you used? And are you sure you have a clear installation of 1.10?

Sounds to me that you haven't installed the dll's the right way. :scratch:

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 10:24 am
by Lerhond
Delete folder with your GR 1.10 and unpack it again. Do not put any files to this folder. Run GeneRally.exe. Is there the same error?

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:30 pm
by Lotus_Renault_GP
Yes, it doesnt works. I setup SDL.dll and msvcr100.dll in c/windows/system32

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:38 pm
by TuomoH
Lotus_Renault_GP wrote:I setup SDL.dll and msvcr100.dll in c/windows/system32
Do you mean you copied them there yourself? If yes, that's not right way to do it, you should use the installer instead. Furthermore, SDL.ddl should be kept in GeneRally folder.

Also, did you use 32-bit or 64-bit version? If there are both versions it doesn't work.

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:41 pm
by Lotus_Renault_GP
My computer is 32-bit.

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:42 pm
by TuomoH
Ok, then 32-bit is the right one. Did you see my edit about how SDL.dll should be kept in GeneRally folder?

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:43 pm
by Lotus_Renault_GP
Give me a this link, link of Generally 32-bit v. and installer of needed files.
Sorry

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:46 pm
by TuomoH
Please delete both the GR1.10 and the installed files, then install a fresh copy of Gr1.10 and follow the instructions in the readme 100%.

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:49 pm
by Lotus_Renault_GP
In readme links are wrote: 404 Not Found

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:50 pm
by TuomoH
Lotus_Renault_GP wrote:In readme links are wrote: 404 Not Found
You get 404 for http://bit.ly/cJT7Gy ? Weird, works for me. :shrug:

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:52 pm
by Lotus_Renault_GP
Which version of SDL GeneRally uses? 1.2 or HG
YES! LINKS WORKS

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:53 pm
by TuomoH
Just download the installer there, be sure that you don't have the files installed from before and run the installer.

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:54 pm
by Lotus_Renault_GP
Lotus_Renault_GP wrote:Which version of SDL GeneRally uses? 1.2 or HG
What I must download? SDL-1.2.14-win32.zip OR SDL-devel-1.2.14-VC8.zip

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:56 pm
by TuomoH
You already have the right SDL.dll with your GR. ;) All you need is to use the installer from the link I provided.

Re: S.O.S. from Russia! 1.10 don't works!

Posted: Sat Jun 04, 2011 12:57 pm
by Areen
You need to install only this library. You don't understand this?