Making Kerbs
Making Kerbs
Hi,
Anyone knowing how to create good kerb with editor like GIMP, Paint or so?
Cause making them in Snakeditor isn't best in WS 255 Tracks
Anyone knowing how to create good kerb with editor like GIMP, Paint or so?
Cause making them in Snakeditor isn't best in WS 255 Tracks
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Re: Making Kerbs
I make them with Paint. I just choose size (2x2, 3x3...) in pixels, then draw them with pencil or with brush (especially on parts parallel to borders).
Re: Making Kerbs
And what about turns?
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Re: Making Kerbs
I guess you could use the curved line tool to make the border, fill, then put in the stripes. Or you can just use the same theory for what Paw mentioned above, but just have a guideline of some sort to follow with the brush or pencil, be ready to hit undo and edit the pixels a bit to make it perfect.
Re: Making Kerbs
With pencil. No exceptions.XYY wrote:And what about turns?
With some other software you can extend the selection and fill, to make a one-color kerb, then make the second color. IIRC there was tutorial by Jimmy, but I can't find it.
- thegreatfalcon
- Posts: 1117
- Joined: Mon Dec 28, 2009 10:26 am
- Contact:
Re: Making Kerbs
If you know a little bit GIMP: http://gene-rally.com/viewtopic.php?p=14466#p14466
- Bouncebackability
- Posts: 2320
- Joined: Mon Dec 28, 2009 12:09 pm
- Location: England
Re: Making Kerbs
i do it the same as Paw, a 2x2 pencil, done accurately, takes about 10 minutes to an average track i think.
there was a tutorial on RSC i think, showing a way of doing them in photoshop (i think it had something to do with making corners in photoshop too. i dont know how well that converts to gimp
there was a tutorial on RSC i think, showing a way of doing them in photoshop (i think it had something to do with making corners in photoshop too. i dont know how well that converts to gimp
Re: Making Kerbs
There's a video of how to do it in photoshop in the Tutorials section.
Re: Making Kerbs
There is easy way to do it with GIMP.
1. Select track
2. Convert to path
3. Draw path with red, in line style uncheck every second dot, so it goes like this: []_[]_[]_[]_[]_ and so on
4. Draw it again, but with white, and invert the dots (_[]_[]_[]_[]_[])
5. Delete parts of kerbs that go over the track
6. Delete unnecessary kerbs
7. ???
8. PROFIT!
1. Select track
2. Convert to path
3. Draw path with red, in line style uncheck every second dot, so it goes like this: []_[]_[]_[]_[]_ and so on
4. Draw it again, but with white, and invert the dots (_[]_[]_[]_[]_[])
5. Delete parts of kerbs that go over the track
6. Delete unnecessary kerbs
7. ???
8. PROFIT!
Re: Making Kerbs
Well, now I got it. but is it also possible to make a path from selection and then strike with c2?
do you understand?
do you understand?
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Re: Making Kerbs
Selfmade, real men dont use tools
Cu Crono
Re: Making Kerbs
I know,Crono (I also used that quite a long time ago) but this is not very good for WS 255 Tracks
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
- Thunderstrucker
- Posts: 1778
- Joined: Thu Jun 03, 2010 10:31 am
- Location: Brazil
Re: Making Kerbs
It's my way. All hand-made, without any tools. Maybe you will inspire.
Re: Making Kerbs
but you didnt build that track?
btw reminds me Norisring
btw reminds me Norisring
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
-
- Posts: 918
- Joined: Sun Dec 27, 2009 3:35 pm
Re: Making Kerbs
How i've made them over the past couple of years (in PSP);
1 - Select track
2 - Create 2px border around track (for 1px white line and 1px tarmac2 line)
3 - Shift+Click on track to make one selection (so the selection is track + 2px border)
4 - Create 3px/4px border.
5 - Use airbrush tool (size 4 or 5) to create kerbs.
6 - Save
1 - Select track
2 - Create 2px border around track (for 1px white line and 1px tarmac2 line)
3 - Shift+Click on track to make one selection (so the selection is track + 2px border)
4 - Create 3px/4px border.
5 - Use airbrush tool (size 4 or 5) to create kerbs.
6 - Save
- Thunderstrucker
- Posts: 1778
- Joined: Thu Jun 03, 2010 10:31 am
- Location: Brazil
Re: Making Kerbs
nah i think in paint is better
GIMP had crashed my GR.
and Paint Shop Pro Playstation Portable ... i don't know.
GIMP had crashed my GR.
and Paint Shop Pro Playstation Portable ... i don't know.
Last edited by Thunderstrucker on Wed Jul 14, 2010 7:23 pm, edited 2 times in total.
Re: Making Kerbs
Nope. I build that track, and yes, it's NorisringXYY wrote:but you didnt build that track?
btw reminds me Norisring
- thegreatfalcon
- Posts: 1117
- Joined: Mon Dec 28, 2009 10:26 am
- Contact:
Re: Making Kerbs
What the hell??? You just don't know how to use it!!!RaphaelACDC wrote:GIMP had crashed my GR.
Re: Making Kerbs
@Raphael: that cant be
My e-mail-address:xyyverwaltung@googlemail.com
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
Last track: Meadowdale Raceways - Last car: Ford Falcon GTHO Phase III
All of my tracks
- Thunderstrucker
- Posts: 1778
- Joined: Thu Jun 03, 2010 10:31 am
- Location: Brazil
Re: Making Kerbs
Where is your gimp folder then? In GR's car/track folder?
- Thunderstrucker
- Posts: 1778
- Joined: Thu Jun 03, 2010 10:31 am
- Location: Brazil
How to do a perfect kerb?
Incidentally, does anyone know of some technique to design kerbs?
Bruno Asp
Velocidade na alma/ Speed in the soul/ Velocidad en el Alma
All my tracks: http://www.gene-rally.com/viewtopic.php?f=21&t=645
Velocidade na alma/ Speed in the soul/ Velocidad en el Alma
All my tracks: http://www.gene-rally.com/viewtopic.php?f=21&t=645
Re: How to do a perfect kerb?
I merged your question with an existing thread - hope this helps.Bruno Asp wrote:Incidentally, does anyone know of some technique to design kerbs?
Since 2002
My GeneRally 2 profile
GR1 essentials: Track Editor Tutorial / All my tracks / My GR1 site
My GeneRally 2 profile
GR1 essentials: Track Editor Tutorial / All my tracks / My GR1 site