How To Race?

All you need to know about the project.

Moderator: Alonsomania

Post Reply
Alonsomania
Posts: 918
Joined: Sun Dec 27, 2009 3:35 pm

How To Race?

Post by Alonsomania »

Step 1
Select your car, the car you'd like to race with, in your garage.

Step 2
Click the 'Play Career' button, then 'Events List'.

Step 3
Below is a scrollbar with all available events. If there is a lock at the bottom that means the event is currently not available as your XP level is too low. Locked events are unclickable.

Step 4
Once you've clicked on an event, a short description will appear.
Click the green icon to participate in the event.

Step 5
Confirm your entry by clicking the green tick. If your car is allowed, all required files are copied and you can race. If not, you will be notified and you will return to the event screen.

Step 6
All required files are copied. Launch GeneRally, remember to set the correct length. The following files are copied:

Player's Car - your car is listed under this.
<Car Name> - your selected car, use this car for racing.
AI's Cars - AI cars are listed under here.
<Group of 5 cars> - 5 cars are copied for use by the AI. first car in line is for AI driver 1, second car in line is for the second AI driver etc.

Once that is selected, select the tracks: first Race 1, then Race 2, then Race 3 etc.

Step 7
Race. Once the race has been finished you can alt+tab (if you're using full screen) and fill in the result in the drop down box. You can also remember/write down the result and do this afterwards.
Once the results are filled in (manually!) click the green tick.

Step 8
Your rewards will be shown in this screen. Click the green tick or red arrow to continue.
Post Reply