[cir] [ral] Circuito di Montabienchi

[NicolasP]

Circuito di Montabienchi - Italy
This track are near of the Italy-Switzerland
border, how the Swiss GP can't held in Switzerland, various Swiss motorsport fans talk with Giuseppe Arnoni, president of Montabienchi Circuit SpA, the Montabienchi circuit are in a total rebuilding phase for that the track fit with the IGRL standards for held soon the Swiss GP of the FormulaCup and TouringCup.
Update 1.4, Pit AI line corrected.

[RobertRacer]

A very good track! The Sandzones are good, but only the RC-Part is a bit ''small''.

[NicolasP]

What means with small, you are talking of the RX track sandtraps or about the track layout is small?

[RobertRacer]

No, Track is width enough, only the Mud/Gravel part of the RX-Park is very small. (Only 10-15%). And BTW at RX-Track one Checkpoint is at wrong place!

[NicolasP]

No, Track is width enough, only the Mud/Gravel part of the RX-Park is very small. (Only 10-15%). And BTW at RX-Track one Checkpoint is at wrong place!

Now i can understand, and wait a minute for update the zip file.

[zgr]

I really like the track, great jobs... LMap is good, HMap is a bit too smooth but okay The placement of the objects are good, too...

It's ALMOST a perfect track...

Why Almost? Well, I just let a AI drive to check the AI, and he crashed the walls four times

When you update the AI-Line, then

And little think, the second limiter looks strange, you should place it better, but thats not important

[NicolasP]

@Zegarek, i go to make 2 questions for you, 1st, what cars you use for test the AI line?, and 2nd, you can send me a photo with the zones where the AI cars crashed?

[RobertRacer]

Why Almost? Well, I just let a AI drive to check the AI, and he crashed the walls four times

+1. And the AI-Pitlane isn't existing (t.m. AI can't pit).

[zgr]

First I used normal Formula Cars, and they only crashed sometimes in this walls...
The FormulaCup-Cars crashed in the marked zones everytime

The red circles on the right --> crashed into the walls

The red circles on the left --> drive over sunk tyres and then crash into a wall

[YoNnie]

That's your one of the best (if not the best) work so far! But I see some problems:
- the main problem of all I saw are walls. they aren't placed as it should be, in some places (if it would be real cirucit) they could be dangerous. If you do rwlsque circuit you have to think like it would be real track, if driver would have to intensively break, where he would do that and all. So you have to look at real tracks and see what I mean
- where is the end of the way under start/meta straght?
- forests aren't mix so good.
And it's my taste, for example on the way in bottom, bottom right you could use little dithering.. However your way to making dithering is better and better, you made huge progress there and I like it Some more work and you will make top-class tracks

[RobertRacer]

And the AI-Pitline isn't good. AI's always crash the walls at pitenter and/or pitexit.

[NicolasP]

How i can make a best AI line?

[RobertRacer]

Regular AI-line is ok, but the Pitlane.....

[RobertRacer]

Perfect, just perfect now.

[NicolasP]

Ok, now are ready, Another comments?

[ivaneurope]

This track is unarguably one of your finest works. At this rate you may become the next trackmaking master.

PS: Did I say that the track resembles Dijon-Prenois, which ironicly hosted Swiss Grand Prix in 1982.

[NicolasP]

This track is unarguably one of your finest works. At this rate you may become the next trackmaking master.

PS: Did I say that the track resembles Dijon-Prenois, which ironicly hosted Swiss Grand Prix in 1982.

Thank you for the comment, in a near future i want to be the chilean Maciej1.
ps. This track was based in a track design that i make in paper, i see and the track resembles to Dijon-Prenois, but i not want to make other French track (the track was Berlouais)

[Marcinho]

Do I know this LMP from shot0042.gif?

Good track and I am waiting for Codegua and first Chilean race GRTCC.